stjorthotic Chapter 206
Chapter 206
Chapter 206
“Crack!”
“Crack!”
“Crack!”
Under the sun, Chu Zihang was sitting under the tool shed chopping bamboo. Every knife was solid, cutting a hole in the bamboo crisply.
Then he slanted the blade and pushed it down, and the bamboo pieces were neatly chopped off piece by piece.
Right now, there are quite a few of these parts and components he prepared, and they look dazzling.
The [Master Carpenter] skill came into effect, and a three-dimensional drawing of a textile machine appeared in Chu Zihang’s mind.
The parts on the ground also seemed to have autonomous consciousness, and they began to piece together in his mind, gradually forming a complex textile machine.
After Chu Zihang strengthened the assembly method in his mind again, he began to assemble some parts to avoid the embarrassment of having too many small parts and not knowing what to do with them.
Parts were passed through Chu Zihang’s hands and turned into small parts by his various installations.
And in this process, netizens are dazzled.
“…Am I too dazzled? Did the director fast-forward with this hand speed?”
“No! It’s you who fucked too much!”
“I lost it! What kind of memory does the scumbag really know from this pile of messy parts?”
“This is called You Chengzhu, do you think the scumbag is joking with you?”
Compared with the amazement of netizens, the eyes of the textile industry old men who had just finished eating sugar and almost went to the hospital were rounded in surprise by Chu Zihang’s operation.
“This, is this a twill loom?”
“No, it doesn’t look much like a diagonal loom, but a bit like a spinning wheel.”
“But this spinning wheel doesn’t seem right?”
After seeing the parts made by Chu Zihang, the group of experts had a thoughtful look on their faces, and some couldn’t figure out what he was going to do.
But I always feel that it is different from the ordinary spinning wheel.
Of course not!
In fact, as far back as the Neolithic Age of primitive society, our ancestors have already invented and made a tool for spinning thread, called “spinning school”, which is a purely manual tool.
It was laborious and slow to use, the twist was uneven, and the yield and quality were low.
Later, as the working people’s understanding of machinery became deeper and deeper, the loom loom gradually appeared. One uses the foot pedal as a power source and threading the thread by hand. The efficiency has improved a lot, but it is still tiring.
Then, with the improvement of the machine, in the Han Dynasty, the twill loom with foot-lifting harness gradually appeared, and the productivity was generally increased by more than 10 times compared with the original loom. It was the most advanced loom in the world at that time.
But these traditional looms are not what Chu Zihang is going to do, what he is going to do is go through a special spinning wheel that he has modified according to his current condition.
Although he also has the intention of promoting traditional culture, he tried to burn porcelain in the wilderness.
But what he wants more is to be lazy! !
Laziness is the source of progress!
Most of the looms before the Industrial Revolution were manpower, with low efficiency, and they could not liberate productive forces, so there was no need to do them any more.
Although he has not yet invented the steam engine, he has a hydraulic engine!
So he improved a hydro-spinning wheel, which can greatly liberate productivity without him having to watch it all the time.
Chu Zihang carefully assembled the small parts. As for the large pieces of wood, wood chips, and bamboo poles, there was no need to assemble them, and it was not too late to assemble them at the destination.
After a while, after finishing most of the small parts, Chu Zihang asked Pig to come over and pulled the other large materials and small parts towards the water wheel of the river.
The blower I made last time was temporarily out of use, so I just used the water wheel.
“Hey, scumbag, this is the direction to go to the water’s edge. Is it to use water power as the engine of the spinning wheel?”
“Yeah, when you say that, it seems to be true. I said that the scumbag is so lazy, how could he possibly do such a super ink-spinning job!”
“The spinning wheel? What kind of car is this? Can it be driven away?”
Netizens frolic, while textile specialists frowned.
A hydro spinning wheel?
Is this also possible?
The hydro-spinning wheel has been heard in the classics. It was a tool used by the big cloth workshops in ancient times to weave cloth, but after the steam engine was introduced, it was never seen again, and only the pedal-type spinning wheel for households remained.
These big guys stared at the screen without saying a word, wanting to see what the legendary hydro-spinning wheel looked like.
Unconsciously, these old men have changed their previous stereotypes, from thinking that Chu Zihang could not make cloth in the wilderness to expecting him to restore the hydro-spinning wheel and make a shocking summer version of wool sweater!
And all these changes are natural, all are impressed by Chu Zihang’s reliable operation!
Whether it’s his scientific way of handling wool or his marvelous carpentry skills, they can’t help but believe it.
Chu Zihang was afraid of damaging the parts, so he drove the pig slowly forward.
· · · · Flowers 0 0
Not in a hurry.
Anyway, the scenery is just right, the wool is still draining, not in a hurry.
After arriving at the water’s edge, Chu Zihang first built a grass hut to shelter from the wind and rain.
This is not difficult. It is very convenient to build a straw shed with bamboo, and then cover it with a layer of hay. It takes about 40 minutes to complete.
The next step is to install the various parts of the hydro-spinning wheel. In fact, the structure of the hydro-spinning wheel is not complicated, and the hydraulic part has been solved. Just make a transmission shaft or use gear transmission.
The textile machine part is simpler. This is something that even female textile workers can manufacture and improve. For a master craftsman like Chu Zihang, there is no difficulty at all.
It is nothing more than a warp and weft wire puller and a wire changer. The principle is very simple, and it is no different from knitting mats.
………………………………..
Just pull the warp (the warp is the vertical wool thread, hemp thread), then let the weft thread pass through it, then the warp thread device is lowered, and the weft thread is turned over and continues to be worn.
Chu Zihang assembles the hydrotextile slowly, first assembling the large structure and building out the frame.
Such a frame is the size of a computer desk, and it looks quite imposing.
Then install the individual components in the frame.
After the components were installed on it by Chu Zihang, a well-structured hydrotextile was basically completed.
But the assembly is complete, the assembly is complete, and it needs to be debugged to know if it can work.
Chu Zihang was going to run the machine to see how it worked, so he installed the transmission structure of the water wheel.
“Kakkaka!”
With the rotation of the water wheel, the transmission shaft also rotates, and even the warp and weft devices of the hydraulic textile machine also start up and down, and the wire rope transmission shaft below also moves.
“It seems to be okay.”
Idling seems to be no problem, but in fact it can work, you have to try it with a wire to know.
Although Chu Zihang’s wool has not yet been twisted into a thread, he can temporarily use the lazy bark rope instead. Although this type of rope is very stiff and very awkward to wear, he is just trying the effect, and it doesn’t get in the way. .
So he put the lazybark thread into the warp and weft instrument as a string, installed it again and ran the weaving machine.
With the addition of the rope, the running of the machine this time is obviously different from the last time!
The pupils of the audience shrank, not only nervous. zero.